제품 설명
2571 China Manufacture Excavator Spare Parts Hydraulic Bucket Cylinder for CHINAMFG Tractor
1. Cylinder Barrel
Hydraulic equipment includes engineering hydraulic cylinder, hydraulic cylinder for metallurgical equipment, hydraulic cylinder for industry and thin hydraulic cylinder, etc. The commonly used materials of DGR-MOB Series Hydraulic Cylinder are seamless steel pipes of 20#, 35#, and 45#, which have been honed or rolled to meet the European roughness requirements of less than 0.4um. Low pressure oil cylinders can use 20# steel pipes, while high pressure oil cylinders can use 45# steel pipes.
2. Piston Rod
There are 2 types of piston rods: CHINAMFG rod and hollow rod. One end of the hollow piston rod should have a vent hole for welding and heat treatment.
The material of the plug rod is 35# and 45# steel, and the material of the hollow piston rod is 35# and 45# seamless steel pipe.
After rough machining, the piston rod is quenched and tempered to a hardness of 229-285HB. If necessary, it is then subjected to high-frequency quenching to achieve a hardness of 45-55HRC.
3. Cylinder Head
Castings for low pressure, HT300 gray iron for medium and low pressure, and 35# and 45# steel for medium and high pressure.
When the cylinder head itself is the guide sleeve of the piston rod, it is best to choose cast iron for the cylinder head. At the same time, brass, bronze. or other wear-resistant materials should be melted CHINAMFG the quide surface. If a structure with a guide sleeve pressed into the cylinder head is used, the guide sleeve should be wear-resistant cast iron, bronze, or brass.
4. Piston
Commonly used materials are wear-resistant cast iron, gray cast iron (HT300, HT350), steel, and aluminum alloy. The coaxiality tolerance value of the piston and piston rod in the structural diagram should be 0.03mm.
| No. | Part Name | Qty | No. | Part Name | Qty |
| 1 | Piston Rod | 1 | 8 | Shaft Nut | 1 |
| 2 | Dust Ring | 1 | 9 | Front Cover | 1 |
| 3 | Shaft Oil Seal | 1 | 10 | Cylinder Barrel | 1 |
| 4 | O-RINGS | 2 | 11 | Bar | 1 |
| 5 | Oil Seal for Holes | 2 | 12 | O-RINGS | 1 |
| 6 | Spring Ring Gasket | 1 | 13 | Piston | 1 |
| 7 | Nut | 1 | 14 | Rear Cover | 1 |
Product Parameters
Company Profile
HangZhou Packway Technology Development Co., LTD, Founded in March 2005, has been at the forefront of innovation, constantly striving to develop cutting-edge technologies and solutions. We currently operate 3 subsidiary companies, each connected with different sectors of the machinery market.
History of the 3 branches.
HangZhou Superworker Technology Co., LTD, established in June 2011, is an innovative enterprise specialized in industrial packaging. The main products and services include: automatic mechanical equipment (steel belt /PET belt strapping machine, clipping belt machine, marking spray machine, labeling machine, etc.), intelligent industrial packaging unit (coil, wire, plate, etc.), intelligent coil logistics system, transformation and upgrading services of similar products, repair and maintenance services of related equipment, supply of wearing parts and consumables. The SUPERWORKER has strong R&D strength and Customers from both domestic and international markets.
With the wide application of automation equipment, HangZhou Dagongren Electric Cylinder Technology Co., Ltd came into being in 2014. We are engaged in designing and manufacturing linear motion products, including servo/stepper motor electric cylinders, linear actuators, multi-degree of freedom platforms, synchronization lifting platforms, VR simulators, etc, with features of high positioning accuracy, low noise, and long life. Our products have been widely used in automated warehousing, robotics, automation equipment, medical equipment, and AGV, vehicles, etc.
Works Hydraulic Technology (HangZhou) Co..Ltd, deeply rooted in the hydraulic, electronic control, and mechanical related industries, focuses on the research and development, production, and sales of electromechanical and hydraulic products. With a professional approach to providing personalized solutions for customers as the main model. Works mainly produces various hydraulic equipment, lubrication equipment, electronic control systems, hydraulic cylinders, and other products.
Features
1.Excellent Material Selection Strict selection of materials, professional processing of the inner wall, smooth operation, and long service life
2.Fine workmanship Fine workmanship prevents oil leakage, greatly improves service life, saves a lot of maintenance costs, reduces friction resistance, and provides overall Mechanical efficiency
3.Easy installation It is very convenient to use, without the need for any matching accessories, reducing installation costs
4.Not prone to oil leakage Stable performance: The oil cylinder adopts excellent sealing components, with good sealing effect to maintain normal operation at high speed
5. Strict quality inspection and assurance of quality Each 1 is made with precision craftsmanship, using excellent standards to process and produce stable structures, saving time and effort, and making it easy to use.
자주 묻는 질문
Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown wooden cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What are your terms of payment?
A: T/T 50% as deposit, and 50% before shipping. We’ll show you the photos of the products and packages before
you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 10-25 days to produce the products, and 5days by air, 25 days of the ship by sea. The specific delivery time depends on the items and the quantity of your order.
Q5: How is the warranty system?
A: 1~5 years. (upon the deal)
Q6. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q7. What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample cost and the courier cost.
Q8. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery.
/* 2571년 3월 10일 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 인증: | GS, RoHS, ISO9001 |
|---|---|
| 압력: | High Pressure |
| 작동 온도: | High Temperature |
| 연기 방식: | 1인 2역 |
| 작업 방식: | Straight Trip |
| 수정된 형태: | Regulated Type |
| 맞춤 설정: | 사용 가능 |
|
|---|
유압 실린더는 정밀한 위치 지정 및 제어라는 과제를 어떻게 해결할까요?
유압 실린더는 엔지니어링 원리와 첨단 제어 시스템의 조합을 통해 정밀한 위치 지정 및 제어라는 과제를 해결하도록 설계되었습니다. 이러한 과제는 산업 자동화, 건설, 자재 운반과 같이 정확하고 제어된 움직임이 요구되는 분야에서 자주 발생합니다. 유압 실린더가 이러한 과제를 어떻게 극복하는지 자세히 살펴보겠습니다.
1. 유압 제어:
유압 실린더는 유체 동력 제어 방식을 이용하여 정밀한 위치 제어 및 조작을 가능하게 합니다. 유압 시스템은 유압 펌프, 제어 밸브 및 유압유로 구성됩니다. 유압유의 유입 및 유출량을 조절함으로써 작업자는 실린더의 속도, 방향 및 힘을 제어할 수 있습니다. 유체 동력 제어는 부드럽고 정확한 움직임을 제공하여 유압 실린더와 연결된 하중을 정밀하게 위치시킬 수 있도록 합니다.
2. 제어 밸브:
제어 밸브는 정밀한 위치 제어 및 조작에 있어 매우 중요한 역할을 합니다. 이 밸브는 시스템 내 유압 유체의 흐름을 조절하는 역할을 하며, 수동 또는 전자식으로 작동할 수 있습니다. 제어 밸브를 통해 작업자는 유압 유체의 유량을 조절하여 실린더의 이동 속도를 제어할 수 있습니다. 유량을 조절함으로써 유압 실린더의 위치를 정밀하게 제어하여 정확하고 정밀한 움직임을 구현할 수 있습니다.
3. 비례 제어:
유압 실린더에는 위치 및 제어 정밀도를 향상시키는 비례 제어 시스템을 장착할 수 있습니다. 비례 제어 시스템은 전자 피드백과 제어 알고리즘을 사용하여 유압 유체의 유량과 압력을 정밀하게 조절합니다. 이러한 시스템은 유압 실린더의 움직임을 정확하고 비례적으로 제어하여 스트로크 길이 전체에 걸쳐 다양한 지점에서 정밀한 위치 제어를 가능하게 합니다. 비례 제어는 정밀한 움직임과 제어가 요구되는 복잡한 작업을 처리하는 실린더의 능력을 향상시킵니다.
4. 위치 피드백 센서:
정밀한 위치 제어를 위해 유압 실린더에는 위치 피드백 센서가 흔히 사용됩니다. 이 센서는 실린더 피스톤 로드의 위치에 대한 실시간 정보를 제공합니다. 일반적인 위치 피드백 센서로는 전위차계, 선형 가변 차동 변환기(LVDT), 자기변형 센서 등이 있습니다. 피드백 센서는 위치를 지속적으로 모니터링하여 폐루프 제어를 가능하게 하고, 유압 실린더의 정확한 위치 제어 및 조작을 지원합니다. 피드백 정보는 유압 유체의 유량을 조절하여 원하는 위치를 정확하게 구현하는 데 사용됩니다.
5. 서보 제어 시스템:
첨단 유압 시스템은 정밀한 위치 제어 및 조작의 어려움을 해결하기 위해 서보 제어 시스템을 사용합니다. 서보 제어 시스템은 전자 제어, 위치 피드백 센서 및 비례 제어 밸브를 결합하여 높은 수준의 정확성과 응답성을 구현합니다. 서보 제어 시스템은 유압 실린더의 목표 위치와 실제 위치를 지속적으로 비교하고 유압 유체의 유량을 조절하여 위치 오차를 최소화합니다. 이러한 폐루프 제어 메커니즘을 통해 유압 실린더는 부하 변화나 외부 교란 상황에서도 정밀한 위치 제어 및 조작을 유지할 수 있습니다.
6. 통합 자동화:
유압 실린더는 정밀한 위치 제어 및 조작을 위해 자동화 시스템에 통합될 수 있습니다. 이러한 시스템에서 유압 실린더는 프로그래밍 가능 로직 컨트롤러(PLC) 또는 기타 자동화 컨트롤러에 의해 제어됩니다. 이 컨트롤러들은 다양한 센서로부터 입력 신호를 받아 미리 프로그래밍된 로직을 사용하여 유압 실린더의 움직임을 제어합니다. 유압 실린더를 자동화 시스템에 통합하면 정밀하고 반복 가능한 위치 제어 및 조작이 가능해져 복잡한 동작 시퀀스를 높은 정확도로 실행할 수 있습니다.
7. 고급 제어 알고리즘:
제어 알고리즘의 발전은 유압 실린더의 정밀한 위치 제어 및 제어에 크게 기여했습니다. PID(비례-적분-미분) 제어, 적응 제어, 모델 기반 제어와 같은 알고리즘은 정교한 제어 전략을 구현할 수 있도록 해줍니다. 이러한 알고리즘은 부하 변동, 시스템 동역학, 환경 조건과 같은 요소를 고려하여 유압 실린더의 제어를 최적화합니다. 고급 제어 알고리즘을 활용함으로써 유압 실린더는 다양한 작동 조건에서 외란을 보상하고 정밀한 위치 제어 및 제어를 달성할 수 있습니다.
요약하자면, 유압 실린더는 유체 동력 제어, 제어 밸브, 비례 제어, 위치 피드백 센서, 서보 제어 시스템, 통합 자동화 및 고급 제어 알고리즘을 활용하여 정밀한 위치 제어 및 정밀 제어의 어려움을 극복합니다. 이러한 요소들을 결합함으로써 유압 실린더는 정확하고 제어된 움직임을 구현하여 다양한 응용 분야에서 정밀한 위치 제어 및 정밀 제어를 가능하게 합니다. 이러한 기능은 산업 자동화, 로봇 공학 및 자재 취급과 같이 높은 정밀도와 반복성이 요구되는 산업 분야에 필수적입니다.
Impact of Hydraulic Cylinders on Overall Productivity of Manufacturing Operations
Hydraulic cylinders play a crucial role in enhancing the overall productivity of manufacturing operations. These versatile devices are widely used in various industrial applications due to their ability to generate powerful and controlled linear motion. Let’s explore how hydraulic cylinders impact the overall productivity of manufacturing operations:
- 강력한 에너지 생성: Hydraulic cylinders are capable of generating high forces, which enables them to handle heavy loads and perform demanding tasks. By providing the necessary force, hydraulic cylinders facilitate efficient and effective operation of machinery and equipment in manufacturing processes. This ability to exert substantial force contributes to increased productivity by enabling the handling of larger workpieces, enhancing process efficiency, and reducing manual labor requirements.
- Precision and Control: Hydraulic cylinders offer precise control over the movement of loads, allowing for accurate positioning, alignment, and repetitive tasks. The smooth and controlled linear motion provided by hydraulic cylinders ensures precise operation in manufacturing processes, such as assembly, material handling, and machining. This precision and control minimize errors, rework, and scrap, leading to improved productivity and higher-quality output.
- Speed and Efficiency: Hydraulic cylinders can operate at high speeds, enabling rapid movement and cycle times in manufacturing operations. The combination of high force and speed allows for faster operation of machinery and equipment, reducing production cycle times and increasing overall throughput. By optimizing the speed and efficiency of manufacturing processes, hydraulic cylinders contribute to improved productivity and output.
- Flexibility and Adaptability: Hydraulic cylinders are highly flexible and adaptable to different manufacturing applications. They can be customized to meet specific requirements, such as load capacity, stroke length, and mounting options. This versatility allows hydraulic cylinders to be integrated into a wide range of machinery and equipment, accommodating diverse manufacturing needs. The ability to adapt to different tasks and environments enhances overall productivity by enabling efficient utilization of resources and facilitating process optimization.
- Reliability and Durability: Hydraulic cylinders are known for their robustness and durability, making them suitable for demanding manufacturing environments. Their ability to withstand heavy loads, repeated use, and harsh operating conditions ensures reliable performance over extended periods. Minimizing downtime due to cylinder failure or maintenance requirements contributes to increased productivity and uninterrupted manufacturing operations.
In summary, hydraulic cylinders have a significant impact on the overall productivity of manufacturing operations. Their powerful force generation, precision and control, speed and efficiency, flexibility and adaptability, as well as reliability and durability, contribute to optimized processes, increased throughput, improved quality, and reduced labor requirements. By leveraging the capabilities of hydraulic cylinders, manufacturers can enhance productivity, streamline operations, and achieve greater efficiency in their manufacturing processes.
Can hydraulic cylinders be adapted for use in both industrial and mobile equipment?
Yes, hydraulic cylinders can be adapted for use in both industrial and mobile equipment. The versatility and adaptability of hydraulic systems make them suitable for a wide range of applications across various industries. Here’s a detailed explanation:
1. Industrial Equipment:
– Hydraulic cylinders are extensively used in industrial equipment such as manufacturing machinery, construction equipment, material handling systems, and heavy-duty machinery. They provide the necessary force and controlled movement for tasks such as lifting, pushing, pulling, and positioning heavy loads. Industrial hydraulic cylinders are typically designed for robustness, durability, and high load-bearing capacities to withstand the demanding environments and heavy-duty applications encountered in industries.
2. Mobile Equipment:
– Hydraulic cylinders are also widely adopted in mobile equipment, including agricultural machinery, mining equipment, forestry machinery, and transportation vehicles. These cylinders enable various functions such as tilting, lifting, steering, and stabilizing. Mobile hydraulic cylinders are designed to be compact, lightweight, and efficient to meet the specific requirements of mobile applications. They are often integrated into hydraulic systems that power multiple functions in a single machine.
3. Adaptability:
– One of the key advantages of hydraulic cylinders is their adaptability. They can be customized and configured to suit different operating conditions, equipment sizes, load capacities, and speed requirements. Hydraulic cylinder manufacturers offer a wide range of sizes, stroke lengths, mounting options, and rod configurations to accommodate diverse applications. This adaptability allows hydraulic cylinders to be utilized in both industrial and mobile equipment, serving various purposes across different sectors.
4. Mounting Options:
– Hydraulic cylinders can be adapted to different mounting arrangements to suit the specific requirements of industrial and mobile equipment. They can be mounted in various orientations, including vertical, horizontal, or at an angle. Different mounting options, such as flange mounts, trunnion mounts, and clevis mounts, provide flexibility in integrating hydraulic cylinders into different equipment designs.
5. Integration with Hydraulic Systems:
– Hydraulic cylinders are often part of a larger hydraulic system that includes components such as pumps, valves, hoses, and reservoirs. These systems can be tailored to meet the specific needs of both industrial and mobile equipment. The hydraulic system’s design and configuration can be adapted to provide the necessary flow rates, pressures, and control mechanisms required for optimal performance in the intended application.
6. Control and Automation:
– Hydraulic cylinders in both industrial and mobile equipment can be integrated with control systems and automation technologies. This allows for precise and automated control of the cylinder’s movement and function. Proportional control valves, sensors, and electronic controls can be incorporated to achieve accurate positioning, speed control, and synchronization of multiple hydraulic cylinders, enhancing overall equipment performance and productivity.
7. 안전 고려 사항:
– Hydraulic cylinders for both industrial and mobile equipment are designed with safety in mind. They often feature built-in safety mechanisms such as overload protection, pressure relief valves, and emergency stop systems to prevent accidents and equipment damage. Safety standards and regulations specific to each industry are taken into account during the design and adaptation of hydraulic cylinders for different applications.
Overall, hydraulic cylinders offer the adaptability and performance required for use in both industrial and mobile equipment. Their versatility, customizable features, mounting options, integration capabilities, and safety considerations make them suitable for a wide range of applications across diverse industries. Whether it’s heavy-duty industrial machinery or mobile equipment operating in challenging environments, hydraulic cylinders can be adapted to meet the specific needs and requirements of various equipment types.
CX 편집, 2023년 12월 21일